Boss GT-PRO Owner's Manual page 112

Driver installation and settings (Windows)
11
With the power switch turned OFF, use the USB cable to connect the GT-PRO to your
computer.
12
Make sure that the GT-PRO's OUTPUT MAIN and SUB knobs are set to the lowest setting,
then switch ON the POWER switch.
13
The Found New Hardware Wizard will appear.
* Your computer may display the message "Can Windows computer to Windows Update to
search for software?" If this occurs, select "No, not this time" and click [Next].
14
The screen will indicate "Please choose your search and installation options".
Select "Install from a list or specific location (Advanced)", and click [Next].
15
The screen will indicate "Please choose your search and installation options".
Select "Don't search. I will choose the driver to install", and click [Next].
16
Make sure that the "Model" field indicates "BOSS GT-PRO", and click [Next]. Driver
installation will begin.
If the "What action do you want Windows to take?" (Step 4) setting was not set to
"Ignore", a "Hardware Installation" dialog box will appear.
A dialog box with a "!" symbol will appear.
1.
Click [Continue Anyway].
2.
Continue the installation.
A dialog box with a "x" symbol will appear.
1.
Click [OK].
2.
When the "Found New Hardware Wizard" appears, click [Finish].
3.
Return to step 1 (p. 111) and re-install the driver from the beginning of the procedure.
17
The Insert Disk dialog box will appear.
Click [OK].
18
The Files Needed dialog box will appear.
Input the following into the "Copy files from" field, and click [OK].
(drive name):\DRIVER\USB_XP2k
* Specify the drive name of your CD-ROM drive.
If the "What action do you want Windows to take?" (Step 4) setting was not set to
"Ignore", a "Hardware Installation" dialog box will appear.
A dialog box with a "!" symbol will appear.
1.
Click [Continue Anyway].
2.
Continue the installation.
19
The screen will indicate "Completing the Found New Hardware Wizard".
Click [Finish].
20
When driver installation has been completed, the System Settings Change dialog box will
appear.
Click [Yes]. Windows will restart automatically.
If the System Setting Change dialog box does not appear, restart Windows from the start
menu.
112
The Insert Disk dialog may not
appear. In that case, proceed to the
next step.