Changing The Exp Pedal Mode When Patches Are Switched (Assign Hold); Setting The Knob Functions (Knob Mode) - Boss GT-PRO Owner's Manual

Changing the EXP Pedal Mode When
Patches are Switched (Assign Hold)
This setting determines whether or not the Assign's (p. 66)
operational status is carried over to the next patch when
patches are switched.
* Assign Hold does not function if the Assign Source mode is set
to Toggle (whereby the value is toggled between Min and Max
each time the pedal is pressed).
fig.10-0340
1. Press [SYSTEM], then press PARAMETER [
[ ] so that "Assign Hold" is displayed.
fig.10-0350d
2. Rotate the PATCH/VALUE dial to set Assign Hold.
Value Explanation
On The Pedal Assign status is carried over.
(Example)
If a patch is switched while the volume is being controlled with
the expression pedal, the volume of the subsequent patch will
take on the value determined by the current pedal position (an-
gle).
If the patch switched to has the expression pedal controlling the
wah effect, then the volume assumes the value set in the patch,
and the patch's wah effect is given the value derived from the
current pedal position (angle).
The Pedal Assign status is not carried
Off
over.
(Example)
If a patch is switched while the volume is being controlled with
an expression pedal, the volume of the subsequent patch is set
to the value set in that patch.
If the expression pedal is operated, and that information is
transmitted to the GT-PRO, the volume will change in accord
with the pedal's movement.
3. Press [EXIT] to return to the Play screen.
2 1 1
3
]
Chapter 10 Other Features
Setting the Knob Functions
(Knob Mode)
This sets the way the values of settings are changed when the
control knobs are turned.
fig.10-0360
1. Press [SYSTEM], then press PARAMETER [
[ ] so that "Knob Mode" is displayed.
fig.10-0370d
2. Rotate the PATCH/VALUE dial to set the Knob mode.
Value Explanation
Turning the knobs immediately changes
Immediate
the values.
Values begin to change only once the
Current Setting knob position reaches the values set in the
patch.
3. Press [EXIT] to return to the Play screen.
2 1 1
3
]
99