Program Change; Pitch Bend Change - Boss BR-1600CD Owner's Manual

❍General Purpose Controller 7 (Controller number 82)
Status 2nd byte
BnH 52H
n = MIDI channel number:
vv = Control value:
❍General Purpose Controller 8 (Controller number 83)
Status 2nd byte
BnH 53H
n = MIDI channel number:
vv = Control value:
❍Portamento control (Controller number 84)
Status 2nd byte
BnH 54H
n = MIDI channel number:
kk = source note number:
❍Effect 1 (Reverb Send Level) (Controller number 91)
Status 2nd byte
BnH 5BH
n = MIDI channel number:
vv = reverb send level:
❍Effect 3 (Chorus Send Level) (Controller number 93)
Status 2nd byte
BnH 5DH
n = MIDI channel number:
vv = chorus send level:
❍RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte
BnH 65H
BnH 64H
n = MIDI channel number:
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
●Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number:
pp = Program number:
* Transmitted according to the content of the SMF during playback of SMFs.
●Channel Pressure
Status 2nd byte
DnH vvH
n = MIDI channel number:
vv = Channel Pressure:
* Transmitted according to the content of the SMF during playback of SMFs.
●Pitch Bend Change
Status 2nd byte
EnH llH
n = MIDI channel number:
mm, ll = Pitch Bend value:
* Transmitted according to the content of the SMF during playback of SMFs.
■Channel Mode Messages
* Transmitted according to the content of the SMF during playback of SMFs.
●All Sound Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number:
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
kkH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
mmH
llH
0H - FH (ch.1 - ch.16 )
0H - FH (ch.1 - ch.16 )
00H - 7FH (prog.1 - prog.128 )
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
mmH
0H - FH (ch.1 - ch.16 )
00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
3rd byte
00H
0H - FH (ch.1 - ch.16)
MIDI Implementation
●Reset All Controllers (Controller number 121)
Status 2nd byte
BnH 79H
n = MIDI channel number:
●All Notes Off (Controller number 123)
Status 2nd byte
BnH 7BH
n = MIDI channel number:
●Omni Off (Controller number 124)
Status 2nd byte
BnH 7CH
n = MIDI channel number:
●Omni On (Controller number 125)
Status 2nd byte
BnH 7DH
n = MIDI channel number:
●Mono (Controller number 126)
Status 2nd byte
BnH 7EH
n = MIDI channel number:
mm = mono number:
●Poly (Controller number 127)
Status 2nd byte
BnH 7FH
n = MIDI channel number:
■System Common Messages
●Quarter Frame Messages
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type :
dddd = 4 bit nibble data:
* If the Sync parameter "Sync Generator" is set to "MTC," quarter frame messages of the
time code type specified by "MTC Type" will be transmitted when the BR-1600CD is
running (recording or playing). The transmitted time counts are summed to "SMPTE
(MTC) Offset Time" as the song top is "00:00:00:00".
Bit Field is assigned as follws.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No. (0-29)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code Type
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00H - 10H (0 - 16 )
3rd byte
00H
0H - FH (ch.1 - 16)
0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
0H - FH (0 - 15)
291