P.map (Midi-Program Chg Map); Midi Bulk Dump; Auto Off; Factory Reset - Boss GT-001 Parameter Manual

P.MAP (MIDI-PROGRAM CHG MAP)

When switching patches using Program Change messages
transmitted by an external MIDI device, you can freely set the
correspondence between Program Change messages received
by the GT-001 and the patches to be switched to in the "Program
Change Map. "
Knob Parameter Value
Page 1 (BANK#0)
BANK#0
[1] PC#
PC#1–PC#128
U001–U200
[4] PATCH
P001–P200
Page 2 (BANK#2)
BANK#1
[1] PC#
PC#1–PC#128
U001–U200
[4] PATCH
P001–P200
Page 3 (BANK#2)
BANK#2
[1] PC#
PC#1–PC#128
U001–U200
[4] PATCH
P001–P200
Page 4 (BANK#3)
BANK#3
[1] PC#
PC#1–PC#128
U001–U200,
[4] PATCH
P001–P200

MIDI BULK DUMP

You can use Exclusive messages to provide another GT-001 with
identical settings, and save effect settings on a MIDI sequencer or
other device.
Knob Parameter Value
SYSTEM
QUICK
U001–
[1] FROM
P200
TEMP
SYSTEM
QUICK
U001–
[4] TO
P200
TEMP
Explanation
Specify the program change
number that you want to assign.
This sets the patch number (U001
through P200) for the correspond-
ing Program Change number.
Specify the program change
number that you want to assign.
This sets the patch number (U001
through P200) for the correspond-
ing Program Change number.
Specify the program change
number that you want to assign.
This sets the patch number (U001
through P200) for the correspond-
ing Program Change number.
Specify the program change
number that you want to assign.
This sets the patch number (U001
through P200) for the correspond-
ing Program Change number.
Explanation
System parameter settings
Settings for User Quick Setting
Settings for Patch Numbers U001−U200
Settings for the patch that is currently
selected
System parameter settings
Settings for User Quick Setting
Settings for Patch Numbers U001−U200
Settings for the patch that is currently
selected

AUTO OFF

The GT-001 can turn off its power automatically. The power will
turn off automatically when 10 hours have passed since you last
played or operated the unit. The display will show a message
approximately 15 minutes before the power turns off.
With the factory settings, this function is turned "ON" (power-off
in 10 hours). If you want to have the power remain on all the time,
turn it "OFF. "
* When the power is turned off, any settings you were editing will
be lost. You must save settings that you want to keep.
Knob Parameter Value
OFF
[1] AUTO OFF
ON

FACTORY RESET

Initializes the GT-001 to its factory-set condition. Refer to "Restoring
the Factory Settings.
Knob Parameter Value
SYSTEM
QUICK
[1] FROM
U001–P200
SYSTEM
QUICK
[4] TO
U001–P200
Explanation
The power will not turn off automatically.
The power will automatically turn off when
10 hours have passed since you last played or
operated the GT-001.
Explanation
System parameter settings
Settings for User Quick Setting
Settings for Patch Numbers
U001−U200
System parameter settings
Settings for User Quick Setting
Settings for Patch Numbers
U001−U200
MENU
37