Assembly; Identifying Parts - Craftsman 113.234701 Owner's Manual

Assembly
It is important for your safety and to get
accurate cuts that you put the saw
together according to these instructions.
Identifying Parts
The following parts are included:
Note: Before beginning assembly, check
that aU parts are included. If you are miss-
ing any part do not assemble saw. Con-
tact your Sears Service Center or Retail
Store and get the missing part. Sometimes
small parts can get lost in packaging
material Do not throw away any packag-
ing until saw is put together. Check pack-
aging for missing parts before contacting
Sears. A complete parts list (Repair
Parts) is at the end of the manual Use
the list to identify the number of the miss-
ing part.
A. Radial Arm ................................. 1
B. Blade Carriage ............................ 1
C. Base .............................................. 1
D. Side Frame .................................. 2
E. Table Support ............................. 2
F. Front Stiffener ............................. 1
G. Rear Table .................................. 1
H. Spacer Table ............................... 1
I. Rip Fence ...................................... 1
J. Front Table ................................... 1
K. Dust Elbow .................................. 1
B
C
D
F
12