Craftsman 113.234701 Owner's Manual page 47

Crosscutting
8. Plug saw in.
9. Put yellow key in switch.
10. Grasp and hold onto saw handle,
then turn saw on.
11. Hold workpiece down and against
fence, keeping hand at least 6" away
from blade.
Fence
Workpiece
Yellow Key
12. Hold hand in straight line with saw
handle and pull blade through fence
and Vcorkpiece only far enough to com-
plete cut, and never more than half
diameter of blade.
13. Push blade carriage to rearmost posi-
tion, behind fence, and turn saw off.
Continue to hold saw handle until blade
stops spinning.
14. Remove yellow key and unplug saw.
47