Crosscutting
Rolling Carriage
_WARNING:
When
saw is turned
on, blade
can
suddenly
come
toward
you.
To
reduce risk of this happening:
1. Keep one hand on saw handle when
turning saw on.
2. Make sure saw slants slightly toward
rear. If needed,
put shim under front
frame.
3. Whenever
saw is moved,
check to be
sure that it is slightly lower in rear.
Thrown Chips
WARNING:
The
saw
can
violently
throw
workpiece
chips.
Pieces
of blade
can break off and be thrown violent-
ly. To reduce
risk of eye injury and
blindness:
1. Wear safety goggles labeled
"ANSI
Z87.1" on package.
Regular
eyeglasses
are not safety goggles.
2. Check blades for damage.
3. Keep saw table clean and clear of all
objects except workpiece
to be cut and
necessary
fixtures or clamps.
WARNING
41