Selecting The Line Mode - Panasonic KX-TG2570F Operating Instructions Manual

• I
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Visual Call Waiting (Call Waiting ID) Service may not be
accessible (p. 51), and the unit may not alert your pager (p. 58), Your
phone comes from the factory set to "A".
Make sure that the unit is in the stand-by mode.
Press [FUNCTION/EDITJ.
_Redial
Directory
v^ OK=Yes
Ringer volume
>Program
VA 0K=Yes
>Save
directory]
Set flash time]
VA 0K=Yes]
_Set line mode
Set dial mode
VA 0K:Yes
Line mode
:A
v^
OK=Savej
Line mode
Press [_] or [_] repeatedly until the arrow
points to
"Program".
Press OK [_ (Yes key).
Press [_9 or [_ repeatedly until the arrow
points to "Set line mode".
Press OK [_ (Yes key).
6
Press [_ or [_ to select "B" or "A", and
press OK [_] (Save key).
• A beep sounds.
• The display will return to step 4. To return
to the stand-by mode, press _ or
wait for 60 seconds.
•You can exit the programming mode any time by pressing _.
• If 3 beeps sound and the display shows "Save
error",
move closer to
the base unit and try again. If "Save error" is still displayed, place the
handset on the base unit. Start again from step 1.
If a power failure occurs, the mode will return to the factory preset (A).
Reprogram if necessary,