Transferring A Callusing Theintercom - Panasonic KX-TG2570F Operating Instructions Manual

During an intercom call:
• Intercom calls can only be ended with the handset.
• If the handset user has difficulty hearing the base unit user, decrease
the base unit speaker volume by pressing VOLUME [_.
• If an incoming call is received, the intercom call stops and the unit starts
to ring. To answer, press _ or [DIGITAL SP-PHONEJ.
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
From the base unit to the
handset
1
Handset:
During a call, press
_. Talk to the
paged party after the beeps.
• The call is put on hold and
"Intercom hold" lS
displayed.
• If the base unit user does
not answer, press _.
Base unit:
When the paging party's
voice is heard, answer
using the MIC.
Base unit:
To answer the calr, press
[DIGITAL SP~PHONE).
• The transfer is complete.
1
Base unit:
During a call, press
[LOCATOR/INTERCOM].
• The call is put on hold.
• If the handset user does not
answer, press
[DIGITAL SP-PHONEJ.
Handset:
Press _ to answer
the page.
Handset:
To answer the call, press
• The transfer is complete.
4_