Selecting The Caller's Recording Time - Panasonic KX-TG2570F Operating Instructions Manual

Preparing the Answering System
Selecting the Caller's Recording Time
You can select "1 minute", "3 minutes" or "greeting only" for the caller's
recording time. Your phone comes from the factory set to "3 minutes".
Make sure that the unit is in the stand-by mode.
Press [FUNCTION/EDIT]. l, Redial
Directory
v^ OK:Yes
Press (][} or (_ repeatedly until the arrow
points to
"Program".
Ringer volume
,Program
VA 0K:Yes
,Save directory
Set flash time
VA
OK=Yes
Talk switching
_TAD program
VA OK:Yes
Answering
system setting
{liD]
Press OK (_ (Yes key).
Press [_ or _[} repeatedly until the arrow
points to "TAD
program".
Press OK (_ (Yes key).
•"P" is displayed on the base unit.
6
Press (_J.
• The current setting is displayed on the
base unit.
1:1 minute
2:3 minutes (factory preset)
3: greeting only
Press (_}, (_ or 1_} to select the recording time.
• The setting is displayed on the base unit.
8
Press OK _.
• A beep sounds.
• The display willreturn to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
76
If you select "greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages.