Pager Mode Setting - Panasonic KX-TG2570F Operating Instructions Manual

Pager Call
Pager Mode Setting
After subscribing to a Caller ID service (p. 32), you can select one of the
following pager mode settings. The unit will alert your pager:
1. After the unit records an incoming message (factory preset),
OR
2. Each time the unit receives a Caller ID call, even if the caller does not
leave a message.
If you want to change the mode, proceed as follows.
Press IFUNCTION/EDIT].
Press _ or (_ repeatedly until the arrow
points to
"Program".
_Redial
Directory
VA OK:Yes
Ringer volume
_Program
VA OK:Yes
_Save directory
Set flash time
VA OK=Yes
Talk switching
_TAD program
VA 0K:Yes
Answering
system setting
[ill]
Press OK [_ (Yes key).
Press {_ or _ repeatedly until the arrow
points to "TAD
program".
Press OK [_
(Yes
key).
• "P" is displayed on the base unit.
6
Press _}.
• The current setting is displayed on the base unit.
To select "2", press [_.
OR
To select "1", press _].
• The entered number is displayed on the base unit.
8
Press OK [_.
• A beep sounds.
• The display will return to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
62
• If you select "2" and set the unit to call a pager (p. 63), the unit will alert
your pager even if the answering system is not turned on.
• Even if you select "2", the unit will not alert your pager if a Caller ID call
which does not have a phone number is received.