Remote Operation With The Handset - Panasonic KX-TG2570F Operating Instructions Manual

Remote Operation with the Handset
You can operate your answering system with the handset.
The announcements and recorded messages can only be heard with the
handset.
I ooo
I ooo
I ooo
_:_:::_ -- [PLAYBACK/PAUSE]
Summary of remote operation
Press (PLAYBACK/PAUSE].
• The number of new messages is heard.
• "RemoLe oDeraL±on" is displayed on the handset,
,I,
Enter the desired direct commands (p. 71).
• If you do not enter a command, the voice menu below will start.
• After the voice menu, all message playback will start.
$
I
To end remote operation, press (PLAYBACK/PAUSE].
• The messages are saved.
• The unit will announce the remaining recording time after playback, if it is
less than 5 minutes.
• If the unit starts to ring during the remote operation, press _ to
answer the call. The remote operation is ended.
• If you hear "Memory full" after playback, erase some or all of the
messages (p. 71).
7O
Voice menu
If no commands are entered after you press [PLAYBACK/PAUSEJ, the unit
will start the following voice menu.
"Press 4 to play back new messages: |hess 5 Io play back all messages."
• You can enter direct commands even if the voice menu has started.