Storing A Second Area Code - Panasonic KX-TG2570F Operating Instructions Manual

Programmable Functions
Storing a Second Area Code
You can also program a second local area code. This area code does not
require "1" before it when dialing. After storing this area code, the display
will show the 10 digits (3-digit area code plus 7-digit phone number) after a
call is received from that area code. Calls will be recorded in the Caller List
without "1". You cannot store a second area code unless your area code is
stored first (p. 17).
Make sure that the unit is in the stand-by mode.
Press [FUNCTION/EDIT]
Press (_9 or [_ repeatedly until the arrow
points to
"Program".
Press OK (_ (Yes key).
Ringer volume
_Program
v^ OK-Yes
Area code
_2nd area code
VA OK=Yes
2nd area code
Enter area code
4
5
6
7
Press (_ or (_ repeatedly until the arrow
points to"2nd area code".
Press OK (_
(Yes
key).
• The current setting is displayed. If no
second area code has been stored, "- -"
will be displayed.
• If 3 beeps sound, your area code is not
stored. Store the code first (p. 17).
Enter a second area code.
• If you enter a wrong number, press BACK
[_ and enter the correct number.
Press OK (_
(Save
key).
• A beep sounds.
• The display will return to step 4. To return
to the stand-by mode, press _ or
wait for 60 seconds.
2nd area code [
:124 1
OK=Savej
2nd area code
:124
18
To erase the second area code
Press BACK [_ in step 6.
• You can exit the programming mode any time by pressing _.