Pager Call; Storing A Pager Number - Panasonic KX-TG2570F Operating Instructions Manual

Pager Call
This feature allows you to alert your pager when the unit records an
incoming message or receives a Caller ID call (p. 62). You can retrieve the
message from a touch tone telephone (p. 64). If you subscribe to a Caller ID
service, the caller's telephone number will be displayed on your pager. First
program the following settings (p. 58-62), then set the unit to call the pager.
Make sure that the unit is in the stand-by mode.
Storing a Pager Number
If you use a 1-800 pager number, see the next page for the storing procedure.
Press [FUNCTION/EDIT[
2
3
4
5
6
7
Press [_ or (_ repeatedly until the arrow
points to "Program".
Press OK _ (Yes key).
Press [] or [_ repeatedly until the arrow
points to "TAD program, and press OK
(Yes key).
• "P" is displayed on the base unit.
Ringer volume
_Program
v^ OK:Yes
_Save
directory I
Set flash time
VA OK=Yes
Talk switching
_TAD program
VA OK:Yes
Press[_.
• "- is displayed on the base unit.
Enter your pager number, and press
[PLAYBACK/PAUSE] twice.* Enter the access code, if required
pager company, and press [PLAYBACK/PAUSE] twice again.*
• The entered number is displayed on the base unit.
• If you misdial, press _ and start again from step 1.
• You can enter a total of 44 digits.
Press OK (_.
• A beep sounds.
• The display will return to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
Answering ]
system setting
(lU]
by your
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing [PLAYBACK/PAUSE] once creates a 3.5
second delay and counts as one digit.
• If the line has rotary or pulse service, press _ between the pager
number and [PLAYBACK/PAUSE] in step 6.
58