Programmable
Functions
Selecting the Ringer Volume
With the handset
You can program the ringer volume to HIGH, LOW or OFF. if set to OFF,
the handset will not ring. Your phone comes from the factory set to HIGH.
Make sure that the unit is in the stand-by mode.
Press [FUNCTION/EDITI.
Press []
or [_] repeatedly to select
"Ringer volume". Press OK [_
(Yes key).
Press []
or [][] to select the desired
volume.
• The selected volume is displayed and
rings.
•To turn the ringer OFF, press and hold
(_[] until 2 beeps sound.
• The handset will return to the stand-by
mode.
To turn the ringer ON, press [_] or [_
in step 3.
• The ringer will sound at the LOW level.
,Redial
Directory
V^
OK=Yes
)Ringer
volume
Program
v^
OK:Yes
Ringer
]
HIGH Low ||||me
High
VA
I Ringer
High
LOW LOW II
VA
OFF
Ringer
off
V^
20
With the base unit
Make sure that the unit is in the stand-by mode.
• To select HIGH (preset) or LOW,
press [HOLD/RINGER]. (Each time you press
the button, the ringer volume will change and
the selected volume will ring.)
• To turn the ringer OFF,
press and hold [HOLD/RINGER] until 2 beeps
sound. "l_Tt'_l
ftFJt" will be displayed.
• To turn the ringer ON,
press {HOLD/RINGER].
The ringer will sound at the HIGH level.
[HOLD/RINGER_