Selecting The Line Mode - Panasonic KX-TC1741B Manual

Selecting the Line Mode
If the line is connectedto a low voltage system such as a PBX, set to "B".
Otherwise the Visual Call Waiting (Call Waiting ID) Service may not be
available (p. 54), and the unit may not alert your pager (p. 60). Your phone
comes from the factory set to "A".
The TALK and DIGITAL SP-PHONE indicator lights must be off before
programming.
Press [PROGRAM].
• The TALK indicatorflashes.
Press SEARCH _ (Next key) repeatedly
until"Set line mode ?" is displayed.
Press SEARCH [_ (Yes key).
To select"B", press SEARCH (_.
OR
To select "A", press SEARCH _.
• A long beep sounds.
• The handset will return to the stand-by
mode.
Save AUT0#^Iye s
v=Next
Set line mode ?
v=Next ^=Yes
Line mode
v=A ^=B
Line mode B
Line mode A
•To cancel during programming,press _ or _. Start again
from step 1. " ,
• If 3 beeps sound and the display shows "Save
error", move
closer to
the base unit and try again. If "Save error" is stilldisplayed, place the
handset on the base unit. Start again from step 1.
if 8 pOW_ i failure _urs, ihe mode W!! I return to the factory preset (A);
Reprogram If neces_ryi ;
]7