Erasing Messages - Panasonic KX-TG2570F Operating Instructions Manual

i::raslng ivlessages
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
- "Memory full" is heard.
-,,r_l/lnl,, is displayed on the base unit.
- the ANSWER ON indicator flashes rapidly.
Erase some or all of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press _ while the message you want to erase is being played.
• The unit erases the message.
• A short beep will sound and the unit will continue to play the next
message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
1
Press _.
• 'Press ERASE agt in to erase all
messages" is heard.
ANSWER ON
Indicator
Within 5 seconds, press
again.
• A long beep sounds and "No
essages is heard. The base
unit display shows "0".
• The information in the caller list will not be erased.
To erase the Caller List information, see page 39.
5_