Panasonic KX-TG2570F Operating Instructions Manual page 41

Press [FUNCTION/EDIT].
Press _ or (_ repeatedly until the
arrow points to "Program", and press
OK [] (Yes key).
While the arrow points to "Save
directory", press OK [] (Yes key).
Ringer volume
_Program
v^ OK:Yes
_Save directory
Set flash time
v^ OK=Yes
Directory=
0 item
Enter name
• #-_J OK=Next
Enter name
Tom Jones
• #=_ OK-Next
Enter phone no.
0987654321
OK Save
Tom Jones
0987654321
Enter a name up to 15 characters with the
dialing buttons, [] (_-) or [_ (-_).
• See the steps for entering names and
symbols on page 42.
• If a name is not required, press OK []
(Next key) and go to step 6.
Press OK [] (Next key).
Enter a phone number up to 22 digits.
• If you misdial, press BACK [_. Digits are
erased from the right.
7
Press
OK [] (Save
key).
• A beep sounds.
• The display will return to step 2. You can
continue storing other items after pressing
OK [] (Yes key).
• To return to the stand-by mode, press
or wait for 60 seconds.
• If a pause is required for dialinq [PLAYBACK/PAUSE] can be stored in a
phone number in step 6. This counts as one digit (p. 50).
• You can exit the programming mode any time by pressing _.
• If the display shows "Hemory is lull" in step 3, the handset will return
to step 2. Press _, and erase other stored items from the
directory (p. 47).
41