Selecting The Line Mode - Panasonic KX-TG2583 Operating Instructions Manual

Settings

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Call Waiting Caller ID Feature may not be used (p. 54).
Your phone comes from the factory set to "A".
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press
2
Ö
points to "Program".
Press
3
FWD/EDIT á
Press
4
Ö
points to "Set line mode".
Press
5
FWD/EDIT á
Press
6
Ö
Press
7
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base. Place on cradle and try again." is displayed.
14
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or to select "B" or "A".
Ñ
(Save key).
.
H
Save directory
Ringer volume
GF H
H
Program
GF H
H
Save DIRECT#
Set flash time
GF H
H
Set line mode
Set dial mode
GF H
Line mode
GF H
=Save
Line mode
GF H
=Save
Line mode
=Yes
=Yes
=Yes
=Yes
:A
:B
:B