Before Requesting Help
Problem
When a second call is
received during a
conversation,
the unit does
not display the new caller's
name and/or phone number.
[LOCATOR/INTERCOMJ on the
base unit does not function.
You cannot redial the last
number dialed.
You cannot have a
conversation
using the
handset.
Remedy
• The line mode selection is incorrect.
See page 15.
• The handset is too far from the base
unit.
• The handset is engaged in an outside
call or is viewing the Caller List. Wait
until the IN USE/CHARGE
indicator
light goes out.
• If the last number dialed was more than
32 digits long, the number will not be
redialed.
• Access numbers entered after pressing
will not be included when
redialing.
• When the headset is connected (p. 72),
you must use the headset to talk with
the caller. To have a normal cordless
phone conversation,
disconnect the
headset.
You cannot have a
conversation using the
headset.
• Make sure that the headset is plugged
into the headset jack properly (p. 72).
76