Flash Button - Panasonic KX-TG2570F Operating Instructions Manual

Special Features
FLASH Button
Pressing [CALL WAIT/FLASH] allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting
the flash time
The flash time depends on your telephone exchange or host PBX. You can
select from flash times: "700,600, 400, 300, 250, 110, 100 or 90 ms
(milliseconds)", using the handset near the base unit. Your phone
comes from the factory set to "700 me".
Make sure that the unit is in the stand-by mode.
Press [FUNCTION/EDIT].
Press [_9 or [][] repeatedly until the arrow
points to "Program".
Press OK [_ (Yes key).
Ringer volume
,Program
v^ OK=Yes
Save directory
,Set flash time
v^ OK:Yes
Flash time
:700ms I
VA OK:Save
Press [] or [][] repeatedly until the arrow
points to "Set flash time".
Press OK (_
(Yes
key).
Press [] or [_ repeatedly until the desired
time is displayed.
7
Press OK [_ (Save key).
• A beep sounds,
• The display will return to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
• You can exit the programming mode any time by pressing _.
• If 3 beeps sound and the display shows "Save
error", move
closer to
the base unit and try again. If "Save error" is still displayed, place the
handset on the base unit. Start again from step 1.
• If you are connected via a PBX, a longer flash time may be necessary to
use PBX functions (transferring a call etc.). Consult your PBX installer for
the correct setting.
If a power failure occurs, the setting will return to the factory preset
(700 ms). Reprogram if necessary.
52