Panasonic KX-TG2570F Operating Instructions Manual page 59

Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager number
as follows.
Press (FUNCTION/EDIT].
Press [_ or (_ repeatedly until the arrow
points to
"Program".
_Redial ]
Directory |
v^ 0K=Yes|
Ringer volume
_Program
VA 0K-Yes
_Save directory
Set flash Lime
v^ OK:Yes
Talk switching
_TAD program
VA OK-Yes
Answering
system setting
(111]
Press OK [_ (Yes key).
Press 1_[] or [_ repeatedly until the arrow
pointsto"TAD
program".
Press OK 1_}
(Yes
key).
• "P" is displayed on the base unit.
6
Press [_.
• "-" is displayed on the base unit.
(]) Enter the 1-800 pager number, and press [PLAYBACK/PAUSE]
3 times.*
(_) Enter the PIN code, and press (PLAYBACK/PAUSE] twice.*
• If you misdial, press _ and start again from step 1.
• You can enter a total of 44 digits.
Press OK [_].
• A beep sounds.
• The display will return to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
* Pager companies require a delay after the pager number and the PIN
code are dialed. Contact your pager company regarding the required
pause time. Pressing [PLAYBACK/PAUSE] once creates a 3.5 second
delay and counts as one digit.
• If the line has rotary or pulse service, press [_ between the pager
number and _LAYBACK/PAUSE] in step 7.
• Alphanumeric voice dispatch pager services will not work with this
function.