Enhanced WSD (SSL)
Set whether to use our proprietary web services over SSL. SSL must be set to "On" in SSL on page 9-99. The
default setting is On.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-103.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of Enhanced WSD (SSL).
3
Press [On] or [Off].
4
Press [OK].
Secure Protocol
Encrypt the communication between your PC and the machine using the SSL encryption.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-103.
The following Secure Protocol settings are available.
•
SSL ...9-99
•
IPP Security ...9-100
•
HTTP Security ...9-100
•
LDAP Security ...9-101
•
SMTP Security ...9-101
•
POP3 Security (User 1) ...9-102
•
POP3 Security (User 2) ...9-102
•
POP3 Security (User 3) ...9-102
SSL
Select whether or not to use SSL. The default setting is On.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-103.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Next] of SSL.
3
Press [On] or [Off].
4
Press [OK].
9-99
Default Setting (System Menu)
9