Kyocera TASKalfa 3050ci Operation Manual page 441

Available Settings
 [Split] selected for Copy/Printer Count
Item
Copy Restriction (Total)
Copy Restr. (Full Color)
Copy Restr. (SingleColor)
Print Restriction (Total)
Print Restr. (Full Color)
Scan Restriction (Others)
FAX TX Restriction
 [Total] selected for Copy/Printer Count
Item
Print Restriction (Total)
Print Restr. (Full Color)
Print Restr. (SingleColor)
Scan Restriction (Others)
FAX TX Restriction
Use the procedure below to specify the counter limits.
Sets the default restriction on the number of sheets used for
color and black and white copying.
Sets the default restriction on the number of sheets used for
full-color copying.
Sets the default restriction on the number of sheets used for
single-color copying.
Sets the default restriction on the total number of sheets used
for color and black and white printing.
Sets the default restriction on the number of sheets used for
color printing.
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
Sets the default restriction on the number of sheets used for sending
faxes. This is displayed when the optional fax kit is installed.
Sets the default restriction on the total number of sheets used
for copying and printing.
Sets the default restriction on the number of sheets used for
full-color printing.
Sets the default restriction on the number of sheets used for
single-color printing.
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
Sets the default restriction on the number of sheets used for sending
faxes. This is displayed when the optional fax kit is installed.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter a login user
name and password, and press [Login]. For this,
you need to login with administrator privileges.
Refer to Adding a User (Local User List) on page
10-5 for the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of Default
Setting and then [Next] of Default Counter Limit.
10-27
Detail
Detail
Management
10