Kyocera TASKalfa 3050ci Operation Manual page 356

File Separation
Set whether transmission copies are divided into multiple files before being forwarded.
Use the procedure below to set the default for File Separation.
1
Press the System Menu key.
2
Press [Send] > [Next] of Send and Forward > [Change] of File Separation.
3
Press [Off] or [Each Page] to set File Separation.
4
Press [OK].
NOTE:
A three-digit serial number such as abc_001.pdf, abc_002.pdf... is attached to the end of the file
name.
E-mail Subject
Set the subject of forwarded e-mails.
Use the procedure below to set the default E-mail Subject.
1
Press the System Menu key.
2
Press [Send] > [Next] of Send and Forward > [Change] of E-mail Subject.
3
Enter a maximum of 60 characters for the e-mail subject and press [OK].
NOTE:
Refer to the Character Entry Method on page Appendix-9 for details on entering characters.
FTP Encrypted TX
Set whether transmission copies are encrypted before being forwarded.
Use the procedure below to set the default FTP Encrypted TX
1
Press the System Menu key.
2
Press [Send] > [Next] of Send and Forward > [Change] of FTP Encrypted TX.
3
Select [Off] or [On].
4
Press [OK].
NOTE:
When the SSL setting is not enabled, FTP encryption transmission cannot be enabled.
9-52
Default Setting (System Menu)