Kyocera TASKalfa 3050ci Operation Manual page 341

3050ci/3550ci/4550ci/5550ci operation guide rev-2.2011.5
Hide thumbs Also See for TASKalfa 3050ci:
Table of Contents

Advertisement

Edit Text Stamp
Set the default text stamp.
Use the procedure below to Edit a Text Stamp.
1
Press the System Menu key.
2
Press [Common Settings] > [
Stamp.
3
Press [Keyboard] and enter a maximum of 32 characters for the text string, or select the text stamp to be
printed from the displayed templates.
4
Press [Position] and set the position of the printed text stamp.
Positions that can be selected are [Top Left], [Top Middle], [Top Right], [Middle Left], [Center], [Middle Right],
[Bottom Left], [Bottom Middle], and [Bottom Right].
5
Press [Font] and set font and display settings for the printed text stamp.
The following settings can be selected.
Item
Size
Style
Font
Color
Density
Display Pattern
6
Press [OK].
Bates Stamp
Select whether or not to set a Bates Stamp.
Use the procedure below to set a Bates Stamp.
1
Press the System Menu key.
2
Press [Common Settings] > [
Stamp.
3
Select [Off] or [On].
4
Press [OK].
NOTE:
When [On] is selected, the Bates Stamp settings cannot be changed when storing.
] > [Next] in System Stamp > [Next] in Storing Jobs > [Change] in Edit Text
Set the font size of the printed text stamp.
Set the font style of the printed text stamp. [Bold] or [Italic] can be
set.
Set the font of the printed text stamp. [Courier] or [Letter Gothic] can
be set.
Set the color of the printed text stamp. [Black], [Cyan], [Magenta],
[Yellow], [Red], [Green], or [Blue] can be set.
Set the density of the color of the printed text stamp.
Set the display method of the printed text stamp. [Transparent],
[Clipping], or [Overwrite] can be selected.
] > [Next] in System Stamp > [Next] in Storing Jobs > [Change] in Bates
9-37
Default Setting (System Menu)
Description
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents