Kyocera TASKalfa 3050ci Operation Manual page 331

Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings.
Item
Fit to Paper Size
Image Resolution
Fit to Print Resolution
Use the procedure below to set the default JPEG/TIFF Print settings.
1
Press the System Menu key.
2
Press [Common Settings], [
Print.
3
Select the default for [Fit to Paper Size], [Image Resolution], or [Fit to Print Resolution].
4
Press [OK].
XPS Fit to Page
Reduces or enlarges the image size to fit to the selected paper size when printing XPS file.
Use the procedure below to set the default XPS Fit to Page settings.
1
Press the System Menu key.
2
Press [Common Settings], [
Page.
3
Select [Off] or [On] for the default.
4
Press [OK].
Continuous Scan
Set the continuous scan defaults. The available default settings are shown below.
Item
Off
On
Refer to page 4-43 for Continuous Scan.
], [Next] of Function Defaults. Press [
Fit the image size to the selected paper size.
Print at resolution of the actual image.
Fit the image size to the print resolution.
], [Next] of Function Defaults. Press [
], [Next] of Function Defaults. Press [
Continuous scan not performed
Continuous scan performed
9-27
Default Setting (System Menu)
] twice and [Change] of Collate/Offset.
Description
] twice and [Change] of JPEG/TIFF
] twice and [Change] of XPS Fit to
Description
9