Ecoprint; Single Color - Kyocera TASKalfa 3050ci Operation Manual

EcoPrint

Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.

EcoPrint

Off
On
:
Original A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status

Single Color

Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of
original type.
Follow the steps shown below for Single Color Copy.
Color Selection
Auto Color
Full Color
Black &
White

Single Color

Original : A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Copies
Toner Save Level
Low High
1 2 3 4 5
Cancel OK
10/10/2010 10:10
Copies
Single Color
Cyan Magenta Yellow
Red Green Blue
Cancel OK
10/10/2010 10:10
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [EcoPrint].
4
Press [On].
5
Press [1] to [5] (Low - High) to adjust the Toner
Save Level.
6
Press [OK].
7
Press the Start key to start copying.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality], [Color Selection] and
then press [Single Color].
4
Select color for copying from [Cyan], [Magenta],
[Yellow], [Red], [Green] or [Blue].
5
Press [OK].
6
Press the Start key. Copying begins.
4-34
Copying Functions