Kyocera TASKalfa 3050ci Operation Manual page 113

Duplex
Original
1-sided
>>1-sided
1-sided
>>2-sided
Binding
Left/Right
2-sided
>>1-sided
2-sided
>>2-sided
:
Original A4
Book
Zoom : 100%
>>1-sided
:
Paper A4
Book
Preview
>>2-sided
Add Shortcut
Status
Collate/Offset
The machine can collate and offset at the same time as it copies.
You can use the Collate/Offset copy function for tasks such as those shown below.
Collate
3
2
1
Original
Offset
Without Document Finisher
3
2
1
Original
Copies
Binding
Top
Top Edge
on Top
Original
Orientation
Cancel OK
10/10/2010 10:10
3
2
1
3
2
1
3
2
1
Copy
3
2
1
3
2
1
Copy (each set)
3-15
6
If you choose [2-sided>>1-sided],
[2-sided>>2-sided], [Book>>1-sided] or
[Book>>2-sided], select the binding edge of the
originals of Original.
7
Press [Original Orientation] to select orientation of
the originals, either [Top Edge on Top] or [Top Edge
on Left]. Then press [OK].
8
Press [OK].
9
Press the Start key.
Once an original placed on the platen is scanned,
replace it with the next one. Then, press the Start
key.
After scanning all originals, press [Finish Scan] to
start copying.
Scan multiple originals and deliver complete sets of
copies as required according to page number.
If the optional document finisher is not installed, when
you use offsetting, printed copies are produced after
rotating each set (or page) by 90º.
NOTE:
To use sorting, the same size of paper as the
selected paper tray must be loaded in a different
orientation in a different paper tray. The paper sizes
supported in Offset are A4, B5, Letter and 16K.
Basic Operation
3