Touch Panel Display - Kyocera TASKalfa 3050ci Operation Manual

Touch Panel Display

Display for Originals and Paper
The touch panel displays the selected paper source and output tray.
Size/orientation of
original and paper
Original
Zoom
Paper
Quick Setup
Status
Display of keys that cannot be set
Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in
a non-selectable state.
Normal
Off Off
Combine Staple
/Punch
NOTE:
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this
case, press the Reset key and try again.
If the key is still grayed out after the Reset key is pressed, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
Press Start key to start printing.
Press [Cancel] to change settings.
Copy Image
Output
tray
Auto
Paper
:
A4
Selection
:
100%
: 1-sided
A4
>>1-sided
Cancel Duplex
Org./Paper/ Color/
Finishing Image Quality
Grayed out
Off Off
Combine
In the following cases, the key is
grayed out and cannot be
selected.
• Cannot be used in
combination with a feature that
is already selected.
• Use prohibited by user control.
• [Preview] has been pressed.
(Refer to Original Preview on
page 3-6)
Original
position
Paper
source
100% Normal 0
Zoom Density
Off Off
Combine Staple
/Punch
Layout/Edit Advanced
Setup
Remaining amount of toner
Off
Staple Combine
/Punch
Cannot be used because an
option is not installed.
Example:
When a finisher is not installed,
[Staple/Punch] does not appear.
3-5
Basic Operation
Copies
Shortcut 1
Shortcut 2
Shortcut 3
Shortcut 4
Shortcut 5
Shortcut 6
Program
10/10/2010 10:10
Hidden
Off
Staple
/Punch
3