Energy Saving Control Function; Automatic 2-Sided Copy Function; Low Power Mode; Paper Recycling - Kyocera TASKalfa 3050ci Operation Manual

Energy Saving Control Function

The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain
amount of time elapses since the device was last used, as well as a Sleep where printer and fax functions
remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with the
device within a set amount of time.

Low Power Mode

The device automatically enters Low Power Mode when 3 minutes (for the 30/30 ppm, 35/35 ppm, or 45/45 ppm
model) or 5 minutes (for the 55/50 ppm model) have passed since the device was last used. The amount of time
of no activity that must pass before Low Power Mode is activated may be lengthened. For more information refer
to Low Power Mode and Auto Low Power Mode on page 2-9.
Sleep
The device automatically enters Sleep when 30 minutes (for the 30/30 ppm model), 45 minutes (for the
35/35 ppm model), or 60 minutes (for the 45/45 ppm or 55/50 ppm model) have passed since the device was
last used. The amount of time of no activity that must pass before Sleep is activated may be lengthened. For
more information see Sleep and Auto Sleep on page 2-10.

Automatic 2-Sided Copy Function

This device includes 2-sided copying as a standard function. For example, by copying two 1-sided originals onto
a single sheet of paper as a 2-sided copy, it is possible to lower the amount of paper used. For more information
see Duplex on page 3-13.

Paper Recycling

This device supports the recycled paper which reduces the load on the environment. Your sales or service
representative can provide information about recommended paper types.
Energy Star (ENERGY STAR
We have determined as a participating company in the International Energy Star Program that
this product is compliant with the standards laid out in the International Energy Star Program.
®
) Program
xxxviii