Permitting Jobs With Unknown Ids - Kyocera TASKalfa 3050ci User Manual

2. In the menu bar at the top of the screen, click Device >
3. Click Network user properties.
4. If you want to get the network user properties, select the
5. Type the server name in the Server name text box. The
6. Select the Port number from the list. Available port numbers
7. Select the Search timeout (seconds) from the list. Available
8. Select Encryption from the list. The LDAP encryption can be
9. The device uses the Acquisition of user information
10. Click OK, and click OK again in the Authentication Settings

Permitting Jobs with Unknown IDs

If you want a device to have no user restrictions and accept print jobs
without a user login and password, you can select the Permit jobs
with unknown IDs check box. The check box is cleared by default.
1. Select a device in the device list. In the menu bar at the top
KMnet Viewer 5.2
Advanced > Authentication settings.
Obtain network user properties check box.
maximum is 64 characters.
range from 1 to 65535.
numbers of seconds range from 5 to 255.
saved to SSL/TLS, STARTTLS, or it can be set to Off.
settings for search and retrieval of login user information
from the LDAP server.
Type a valid username in the Name 1 text box. The
maximum length is 32 characters.
Type another valid username in the Name 2 text box. The
maximum length is 32 characters.
Type a valid e-mail address in the E-mail address text box.
The maximum length is 32 characters.
dialog box to save your settings and close the dialog box.
of the screen, click Device > Advanced > Authentication
40