1.
2.
3.
Adding a New Virtual Mailbox
You can create a new virtual mailbox on the hard disk. A maximum of
255 virtual mailboxes is supported.
1. Select a device.
2. Select Device > Virtual Mailbox. The Virtual Mailbox
3. Click New Mailbox.
4. Enter a new ID, name, new password, confirm the password,
Editing a Virtual Mailbox
You can set the name and password of a virtual mailbox stored on
the hard disk. If you click Refresh All with one virtual mailbox
selected, all virtual mailboxes are refreshed.
1. Select a device.
2. Select Device > Virtual Mailbox. The Virtual Mailbox
3. Select a virtual mailbox and click Properties. The
4. Type a new Name, and type a password (from 1 to 65535).
5. Click OK.
Device Notification Settings
The Notification feature is used to inform users of changes in the
status of the printing device. There are three types of notifications
KMnet Viewer 5.2
Click Delete all, then click Yes to confirm.
Click OK in the Advanced dialog box.
Click Close in the Virtual Mailbox dialog box.
dialog box opens.
and click OK. The same name cannot be used for two virtual
mailboxes.
dialog box opens.
Properties dialog box opens.
In Confirm new password, type the password again.
36