Confirming Selected Firmware; Verifying Upgrade Settings; Authorizing Firmware Upgrade - Kyocera TASKalfa 3050ci User Manual

Note: Firmware files are not provided with this application. Consult
your dealer.

Confirming Selected Firmware

When upgrading multiple devices, the process bypasses any devices
that do not match the model(s) for the selected firmware. If there are
no matching devices that require a version upgrade, the wizard
displays an error message.
If the selected firmware file version is lower than the currently
installed version in a single device, then the installed firmware will be
downgraded. If the selected firmware file version is the same as the
currently installed version, then the firmware will be installed again.
After confirming the selected firmware, click Upgrade.

Verifying Upgrade Settings

When upgrading multiple devices, the process bypasses any devices
that do not match the models for the selected firmware. If the
firmware cannot be validated for any of the devices you have
selected, you will receive a message informing you.
The Firmware Information page displays a summary of the settings
you have chosen for the firmware upgrade before the upgrade
begins. The summary can include:
Firmware Information
Displays the firmware type for the upgrade and the version of the
new firmware.
Model List
Displays the device model being upgraded.
Review the summary of settings for accuracy and completeness.
Click Back and return to the page of your choice if there is
anything in the settings you want to change.
Click Cancel if you want to start the wizard over from the
beginning and reenter settings.
Click Upgrade if the summary of settings is correct.

Authorizing Firmware Upgrade

The firmware upgrade cannot be performed without proper login
authorization for each device. Login authorization must be provided
before the firmware upgrade process is started.
KMnet Viewer 5.2 72