Offset Jobs; Finishing Edge - Kyocera TASKalfa 2550ci User Manual

1
2
3
4
5

Offset Jobs

Offsetting Jobs
1
2
3
4

Finishing Edge

Printer Driver
In Basic > Destination, select an option that is not a finishing tray, for example:
Printer default.
Select a number of copies greater than 1.
In Finishing > Separation, select Rotate copies.
Click OK to return to the Print dialog box.
Click OK to start printing.
The Offset jobs feature physically shifts each print job in the output tray.
To ensure consistent offset stacking, all users printing to the same printing
system should select Offset jobs as the default setting.
The Offset jobs feature requires a finishing device to be selected under Device
options in Device Settings. It does not work with the Staple or the Finishing
edge features.
You can offset, or shift each print job in the output tray.
In Basic > Destination, select an option that is available for the finisher you
selected in Device Settings > Device options. Selections vary according to
printing system model.
In Finishing > Separation > Offset jobs.
Click OK to return to the Print dialog box.
Click OK to start printing.
Finishing edge aligns the matching sides of two different page sizes in a
document. For example, the long edge of an A4 page is aligned with the short
edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the
staple feature.
You can choose the position of staples in a document composed of mixed page
sizes. In contrast, if you are printing a mixed page size document without using
Finishing edge, staple positions depend on the paper size settings (portrait or
landscape) in the paper cassettes.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple.
Selecting Finishing edge makes some other features unavailable, such as
Separation and Rotated. Finishing edge cannot be used with the Poster
feature.
Finishing
6-2