Device Discovery; Adding Devices - Kyocera TASKalfa 3050ci User Manual

user login password. If no password has been set up for a user
without administrator rights, the application does not start, and an
access error message appears.
1. In the menu bar at the top left of the screen, click Edit >
2. Select Enable local password.
3. In the New password text box, type a password for a
4. In Confirm password, type the password again.
5. Click OK to save the password.

Device Discovery

Discovery is a process that checks networks for printing devices.
If new devices are found, then the application updates its
database with information about the device. This process can be
performed manually for single or multiple devices, or it can be
scheduled to run automatically according to a set schedule. It is
also possible to exclude devices from being discovered.
When the application is launched for the first time, or when a new
workspace is opened, the Add Device wizard automatically
launches.

Adding Devices

You can use the Add Device wizard to add devices to the view
list.
1. Click Device > Discovery > Add Devices.
2. In the Add Device wizard, select a method for adding
3. For the selected method, complete the wizard and click
KMnet Viewer 5.2
Options. In the Options dialog box, click
Authentication.
local user. A password is a maximum of 32 characters. A
blank password is allowed.
devices:
Express
Uses predefined communication settings to find
devices in the local network.
Custom
Lets you select settings to find devices on any
network.
Finish to begin discovery.
2