Communication Settings; Setting Device Communications; Tcp/Ip Port; Setting The Port Number In Command Center - Kyocera TASKalfa 3050ci User Manual

5 Communication Settings

Communication Settings control the network communications with
each device. Available settings vary depending on the model and can
include Network interface settings, Secure protocol settings,
Login, and Account Polling Settings, and Device Polling
Settings.
If authentication is enabled, the Login user name and Password
must be set correctly in order to access several functions of the
device, such as Address Book, Users, or Document Box.

Setting Device Communications

You can change the various communications-related settings in the
Communication Settings dialog box for the selected device.
1. In any Device view or in Accounting Devices View, select a
2. In the menu bar at the top of the screen, click Device >
3. In the field next to the communication setting to be changed,
4. Click OK to save the updated value. There is no confirmation

TCP/IP Port

Some operations send a command or command file via a logical
printer port. The default logical printer port numbers begin with 9100.
The valid range for port numbers is 1024 to 65534. The number must
match the port number of one of the Logical Printers defined for a
device. To determine the port number, see the Logical Printers web
page in the Command Center or the device home page.

Setting the Port Number in Command Center

1. To access the Command Center, select a device.
KMnet Viewer 5.2
device.
Communication Settings. Alternatively, right-click on your
chosen device, and then in the context menu click
Communication Settings.
enter the new value. You may be able to use a selector or
drop-down menu if available.
message; the changes are saved immediately.
61