View Management; View As; Default Views - Kyocera TASKalfa 3050ci User Manual

2 View Management

The application offers two types of views: custom views that are
listed under the My Views heading, and eight standard views defined
by the application that are listed under Default Views. The default
views are:
Device:
General View, Capability View, Counter View, Firmware View,
Asset View, Map View
Account:
Accounting Devices View, Accounts View
You can create, change, or delete views in My Views. In the Default
Views, you can customize the appearance of the lists, but the
changes are not saved after you leave the view. You cannot make
permanent changes to the views in Default Views.

View As

You can switch to a different view by using the View As feature in
the View menu. Select the view you want to change, click View >
View As, and click the new view from the list.
If the original view is under Default Views, the view switches to
the selected default view.
If the original view is under My Views, the view itself changes to
the selected view. To save the view, click Update View.
This feature is not available for Accounting Devices View,
Accounts View, or custom account views under My Views.

Default Views

The application provides eight standard views under Default Views
that cannot be removed or edited. Display Name, IP Address and
Host Name are included in all views except Map View and
Accounts View.
In any view except Map View, you can add or remove columns from
the table temporarily. Right-click on the column heading and select or
clear the desired item or items. The modified views are not saved
when you switch to a different view.
KMnet Viewer 5.2 8