Warning: This is an advanced feature. Incorrect use can cause the
device to become inoperable.
Sending TCP Data
To send data to the device interface:
1. In the device list, select a device. To set the same
2. In the menu at the top of the screen, click Device >
3. In the TCP Send Data dialog box, select the TCP port or
4. To send data from a file, click the Browse button and select
5. To send data as text, type the text in the box. Use this option
6. Click Send to send the data.
KMnet Viewer 5.2
notifications for more than one device, press Ctrl or Shift +
click to select devices.
Advanced > TCP Send Data.
IPPS path. You can select the default or a specific TCP port
on the device. The port number must match that of one of the
Logical Printers defined in the Command Center for the
device. The range is 1-65535.
the file. Use this option to send macros or printable files,
such as PDF or PRN.
to send PRESCRIBE commands. Click History to retrieve a
previously sent text string. The History retains up to 10
previously sent text strings.
45