Multi-Bypass Tray Confirmation Display - Kyocera KM-1650 Advanced Operation Manual

Paper Type (cassettes 1 to 4)

Multi-Bypass Tray Confirmation Display

ADVANCED OPERATION GUIDE
4 Press [Reset]. The Copier Basic screen returns.
Use to set the paper types for cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough,
Letterhead, Color, Prepunched, High quality and Custom 1 to 8.
NOTE:
For the 16 ppm model, cassettes 2 to 4 are included in the
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4
are included in the optional Paper Feeder. This setting is displayed only if
the optional Paper Feeder is installed.
1 Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
A Paper Type option is available
for each cassette. Press
to select the Paper Type option
required and press [Enter].
3 Press or to select the paper
type and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to select to display the Bypass Paper Size screen when pressing the
Paper Select key to select the Multi-Bypass Tray.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press or to select Check
Bypass and press [Enter].
3
Press or to select On or Off
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Machine Default:
or
Paper Size(3rd)
Paper Size(4th)
Paper Type(1st)
Paper Type (1st cassette):
Plain
*
Preprinted
Bond
Machine Default:
Paper Type(3rd)
Paper Type(4th)
Check Bypass
Check Bypass Sizing:
Off
*
On
System Settings
:
Auto I
: Auto I
: Plain
: Plain
: Plain
: Off
3-17