Black Streaking Reduction Processing - Kyocera KM-1650 Advanced Operation Manual

Black Streaking Reduction Processing

ADVANCED OPERATION GUIDE
If black streaks (streaks that are not contained in the original image)
appear on copies from the optional Document Processor, you can make
black streaking less noticeable. Black Streaking Reduction processing
reduces the reproducibility of fine characters, therefore it is recommended
to use the factory default setting.
To use the Black Streaking Reduction processing, first select Weak. If
black streaking is not reduced, select Strong
1 Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2
Press or to select Corr.
Black line and press [Enter].
3 Press or to select None,
Weak or Strong and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
System Settings
Copy Default:
BorderEraseWidth
Copy Limit
Corr. Black Line
Correct. Fine black line:
None
*
Weak
Strong
: 1/4"
: 999 Set
: None
3-13