Display Contrast Adjustment; Administrator Management Code Change - Kyocera KM-1650 Advanced Operation Manual

Display Contrast Adjustment

Administrator Management Code Change

ADVANCED OPERATION GUIDE
Use to adjust the Display Contrast if required.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press or to select Display
Contrast and press [Enter].
3
Press < or > to adjust the contrast.
Move left to darken the contrast,
or right to lightens the contrast
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
You can change the 4-digit Management Code for the machine
administrator.
IMPORTANT: If you change the Management Code, ensure you note it
down. If you forget the code, contact your Service Representative.
NOTE:
The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
1
Press or to select PIN #
Change or MGMT Code.
NOTE:
If using a metric machine, this option displays as MGMT Code
entry.
2
Use the numeric keys to enter the
new Administrator Management
Code and press [Enter].
3 Press [Reset]. The Copier Basic screen returns.
System Settings
Machine Default:
Key Sound On/Off
Date/Time
Display Contrast
Display Contrast Adjustment:
*
Machine Default:
Date/Time
Display Contrast
PIN # Change
Management Code Change:
1600
# keys
: On
: 08:48
:
: 08:48
:
3-25