Auto Low Power Time; Copy Output Destination - Kyocera KM-1650 Advanced Operation Manual

Auto Low Power Time

Copy Output Destination

ADVANCED OPERATION GUIDE
2 Press or
mode time and press [Enter].
3
Press < or > to select the time
required from 1 to 240 minutes or
1 to 120 minutes and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to set the time that elapses before Low Power mode is automatically
activated.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments)
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2 Press or
time and press [Enter].
3
Press < or > to select the time
required from 1 to 240 minutes or
1 to 120 minutes and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to set the paper output destination with priority for copying.
Setting Item
Top Tray Main body output tray
Finisher Optional Finisher
Job Separator Optional Job Separator
to select Sleep
Machine Default:
Sleep Mode Time:
to select Low power
Machine Default:
Low Power Mode Time:
Output Destination
System Settings
Specific P. Type : Fast Mode
Orig. Direction : Rear
Sleep Mode Time : 30
30 Min. 1-240 Min.
Orig. Direction : Rear
Sleep Mode Time : 30Min.
Low Power Time : 15Min.
15 Min. 1-240 Min.
Min.
3-21