Kyocera KM-1650 Advanced Operation Manual page 42

Printer Settings
2-14
TCP/IP
Set this option to On if connecting to a Windows network via TCP/IP.
1
Display the Interface screen, refer to Access the Interface Screen, on page
2-11.
2
Press or
and press [Enter].
3
Press or
and press [Enter].
4 Press or
press [Enter].
DHCP
Set this option to On if using DHCP (Dynamic Host Configuration Protocol).
1
Display the TCP/IP screen, refer to TCP/IP, on page 2-14.
2 Press or
and press [Enter].
3
Press or to select DHCP and
press [Enter].
4
Press or
press [Enter].
to select Network
Interface
to select TCP/IP
Network Setting
to select On and
TCP/IP
to select Change #
TCP/IP
TCP/IP Setting
to select On and
DHCP
Back
Parallel
Network
Back
NetWare
TCP/IP
Back
On
Off
On
Off
Change #
Back
DHCP
IP Address
Back
On
Off
ADVANCED OPERATION GUIDE