Kpdl Error Printing - Kyocera KM-1650 Advanced Operation Manual

Printer Settings

KPDL Error Printing

KPDL (AUTO) Alternative Emulation Selection
2-20
The details of any error that occurs during printing in the KPDL emulation
mode can be printed. Continue the procedure from step 5 of Emulation
Mode Selection to set up.
1
Press or to select Print
KPDL Errs and press [Enter].
If On is selected, the details of any
error will be printed.
2
Press [Reset]. The Printer Basic screen displays.
If you set KPDL (AUTO), switching between KPDL and an alternative
emulation mode will be automatically performed according to print data.
Continue the procedure from step 5 of emulation mode selection to setup.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter,
DIABLO 630, EPSON LQ-850
1
Press or to select Alt.
Emulation and press [Enter].
2
Press or to select the
emulation mode and press
[Enter].
3 Press [Reset]. The Printer Basic screen displays.
KPDL
Back
Print KPDL Errs
KPDL(AUTO)
Back
Alt. Emulation
Print KPDL Errs
Alt. Emulation
Back
PCL 6
KC-GL
ADVANCED OPERATION GUIDE