Stapling Error Detection - Kyocera KM-1650 Advanced Operation Manual

Stapling Error Detection

ADVANCED OPERATION GUIDE
You can select whether or not to display Add Staples and Press GO when
staples have run out while stapling is performed.
Setting
On If you select GO, printing is performed without stapling.
If you select CANCEL, printing is canceled.
Off Printing is performed without stapling.
NOTE:
This setting is displayed only if the optional Finisher is installed.
1
Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press or
Error and press [Enter].
3 Press or
Setting and press [Enter].
4
Press or
and press [Enter].
5
Press [Reset]. The Printer Basic screen displays.
Processing
to select Finishing
Others
to select Staple
Finishing Error
to select On or Off
Staple Setting
Printer Settings
Resource Prot.
Auto Continue
Finishing Error
Back
Proces. Duplex print
Staple Setting
Back
On
Off
2-53