Auto Clear Time
Silent Mode
ADVANCED OPERATION GUIDE
Use to set the time that elapses from completion of copying to activation of
the Auto Clear function, if it is enabled.
Time that can be set: 10 to 270 seconds (in 10 second increments)
NOTE:
This item is not displayed if the Auto Clear function is Off.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press
or
to select Auto Clear
Time and press [Enter].
3
Press < or > to select the time
from 10 to 270 seconds and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
This mode reduces the operating noise caused by the machine.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press
or
to select Silent
Mode and press [Enter].
3
Press
or
to select On or Off
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
System Settings
Machine Default:
Auto Sleep
Auto Clear
Auto Clear Time
Auto Clear Time:
90
Sec.
10-270
Machine Default:
Auto Sleep
Auto Clear
Silent Mode
Silent Mode:
Off
On
*
:
On
:
On
: 90Sec.
:
Sec.
:
On
:
Off
: On
3-27