Kyocera KM-1650 Advanced Operation Manual page 150

Appendix
IPP (Internet Print Protocol)
Logical Printer
Low power mode
Multi-Bypass tray
NetBEUI (NetBIOS Extended
User Interface)
Outline font
Parallel interface
PostScript
PPM (prints per minute)
Printer driver
Appendix-18
numbers separated by dots, e.g. 192.168.110.171. Each number should
be a decimal between 0 and 255.
This enables output to the printer from a printer driver over the Internet or
an intranet and via an IPP port. Using IPP, output to a remote printer is
possible over the Internet.
KIR This is smoothing function. It uses software to enhance the printer's
resolution and produce high-quality printing. The default setting is On.
KPDL KPDL is Kyocera's implementation of the PostScript page description
language Level3.
This is a software interface that exists between the Windows OS and the
printers connected to it. A printer refers to the actual device that prints out,
while a logical printer refers to the software interface that resides on the
printer server.By using this interface, the method of processing print jobs
as well as the method of sending that job to its destination (local port,
network port, file or remote printer sharing) is determined. When printing a
document, the document data is first spooled (stored) in the logical printer
from which it is then sent to the actual printer.
This mode is provided to save power. It is activated when the machine is
not used for a preset period of time.In this mode, the machine consumes
less power than in standby mode. The default time period is 15 minutes.
The default setting can be changed.
This tray is used instead of the cassette when printing on envelopes,
postcards, transparency sheets, and labels.
An enhanced version of the NetBIOS protocol, it enables the utilization of
more advanced functions on small-scale networks than do other protocols
such as TCP/IP, etc.
With outline fonts, character outlines are represented with numerical
expressions and fonts can be enlarged or reduced in different ways by
changing the numeric values of those expressions. Printing remains clear
even if you enlarge fonts, since the characters are defined with outlines
represented with numerical expressions. You can specify the font size in
steps of 0.25 points up to 999.75 points.
With this interface, data transfer between the printer and the computer
takes place in 8-bit chunks. The printer can perform IEEE1284 compatible
bi-directional communications.
This is a page description language developed by Adobe Systems, Inc. It
enables flexible font functions and highly-functional graphics, allowing
higher quality printing.
This indicates the number of A4 size printouts made in one minute.
The printer driver makes it possible for you to print data created using
application software. The printer driver for the printer is contained on the
ADVANCED OPERATION GUIDE