Program Function; Registering A Program; Using A Program - Kyocera KM-1650 Advanced Operation Manual

Copy Functions

Program Function

Registering a Program

Using a Program

1-18
Up to eight combinations of copy modes and functions displayed on the
operation panel can be registered as a single program.
1
Select the copy options to be registered (for example 5 copies, Sort,
Margin) and press [Program].
2
Press or to select Register
program and press [Enter].
3
Press or to select the
program number required (1 to 8)
and press [Enter].
The program is registered.
NOTE:
You can also select the program number using a numeric key.
1
Press [Program].
2
Press or to select the
program number required and
press [Enter].
NOTE:
You can also select the program number using a numeric key.
3
Position the originals and press [Start].
Copies are produced using the settings registered in the program.
Program:
Program #7
Program #8
Register program.
Register program:
Program #1
Program #2
Program #3
Program:
Program #1
Program #2
Program #3
ADVANCED OPERATION GUIDE