IMPORTANT SAFETY INSTRUCTIONS
Read all of these instructions before you set up your printer.
•
Follow all warnings and instructions marked on the printer.
•
Unplug the printer from the wall outlet before you clean it,
•
and use a damp cloth for cleaning, not liquid or aerosol
cleaners.
Do not use your printer near water or spill any liquid on it.
•
Do not place the printer on an unstable cart, stand, table or
•
other surface that may allow the printer to fall.
Do not block any slots or openings in the cabinet. These are
•
provided for the ventilation necessary to ensure reliable
operation and protection from overheating. Placing the printer
on a bed, sofa, rug, or other similar surface may block the
openings. Also, do not place the printer in a built-in
installation unless proper ventilation is provided.
Never place the printer near or over a radiator or heat register.
•
Use the type of power source indicated on the label. If you are
•
not sure of the type of power available, consult your dealer or
local power company,
This printer may be equipped with a plug having a third
•
(grounding) pin, which fits only into a grounding-type outlet.
This is a safety feature. If you are unable to insert the plug
into the outlet, have an electrician replace your obsolete outlet.
Do not defeat the purpose of the grounding-type plug.
Do not put the printer where the cord will be walked on.
•
iii